Using The Reversible Slicing/Shredding Disc - Black & Decker FP3300SKT Mode D'emploi

3. To stop, press OFF|PULSE.
4. Always unplug the appliance when not in use.
PULSE
Use for precise
control when
chopping/mixing
Fresh herbs
Nuts
Bread crumbs
Meat

USING THE REVERSIBLE SLICING/SHREDDING DISC

1. Lock the workbowl into position.
2. Place blade shaft onto center post in workbowl.
3. Insert your fingers in the 2 large round holes on the disc
with the desired side up (slicing or shredding) and place
disc onto blade shaft in workbowl (G). You may need to
rotate the disc slightly so it fits onto post.
4. Place lid on workbowl and lock into place by rotating counterclockwise.
5. Place food in feed chute and use food pusher to guide foods towards the slicing/
shredding disc.
6. Press MEDIUM speed button; press lightly but firmly on food pusher to guide food
through processor.
Note: Heavy pressure on the pusher does not speed the work; use the pusher only as a
guide. Let the processor do the work.
7. When finished, press OFF|PULSE and allow the disc to stop revolving and unplug
appliance before removing lid. Twist lid clockwise to unlock and remove.
LOW - SPEED 1
Use for Mixing
Dough
(continuous processing)
Bread dough
Crusts
MED - SPEED 2
Slicing and
Shredding
(continuous processing)
Vegetables including
• potatoes
• onions
• cucumbers
• cabbage
• carrots
Fruit
Cheese
(freeze 30 min. prior)
Chocolate
6
HIGH - SPEED 3
Chopping
and Mixing
(continuous processing)
Vegetables including
• potatoes
• onions
• cucumbers
Fruit
Bread crumbs
Meat
Sauces, Batters, Dips
G