Vortice Vario C02 Notice D'emploi Et D'entretien page 45

ENGLISH
Register 41: End hourly schedule period2 FRIDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 42: Start hourly schedule period1 SATURDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 43: End hourly schedule period1 SATURDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 44: Start hourly schedule period2 SATURDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 45: End hourly schedule period2 SATURDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
45