Vortice Vario C02 Notice D'emploi Et D'entretien page 42

ENGLISH
Register 26: Start hourly schedule period1 TUESDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 27: End hourly schedule period1 TUESDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 28: Start hourly schedule period2 TUESDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 29: End hourly schedule period2 TUESDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
- Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
Register 30: Start hourly schedule period1 WEDNESDAY (hour: Minutes) [read/write].
0xAAAA: Hour no defined (– – : – –).
- Byte high: Hour.
The value that is sent is the value of the hour (0h to 23h, 0xAA [170dec]: No defined) In binary 16 bits.
Value by default: 0xAA[170dec] [No defined].
Byte low: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: No defined) In binary
16 bits.
Value by default: 0xAA[170dec] [No defined].
42