Reset Partial Data; Change Inv Number; Autotest - Ingeteam Sun Smart TL Manuel D'utilisateur

User manual

3.9. Reset Partial Data

This menu serves to zero the partial counters: Part E, Tp con and Npcon.
Click on OK to zero the counters. The following message will
be displayed:
OK
Click on once more, to confirm the selection.

3.10. Change inv number

This menu serves to assign a number to each inverter phase. This is required to configure the communications.
Click on OK for the phase whose number is to be changed.
10:22
MAIN MENU
Change date
Start/Stop
Partial Data Reset
Change inv number
Once in the menu of the selected phase, use keys
and to change the inverter number.
OK
Click on to confirm the number selected.

3.11. Autotest

Some inverter configurations feature an additional self-test
menu called Autotest. In these configurations, this sub-menu
will appear at the end of the main menu.
To access this menu, click on
AAY2000IKE03
14/04/11
OK once over the Autotest option.
10:22
MAIN MENU
Change date
Start/Stop
Partial Data Reset
Change inv number
10:22
PARTIAL DATA RESET
Confirm (OK)
Cancel (ESC)
10:22
CHANGE INV NUMBER
Phase 1
Phase 2
Phase 3
10:22
CHANGE INV NUMBER
Inverter number 101
Confirm (OK)
Cancel (ESC)
10:22
MAIN MENU
Start/Stop
Partial Data Reset
Change inv number
Autotest
Ingeteam Energy, S.A.
14/04/11
14/04/11
14/04/11
14/04/11
14/04/11
23