emmeti Gerpex Manuel D'utilisation page 14

INDEX
1 Equipment check ...................... 15
1.1 Radial press joint tool and pliers
1.2 Measuring Calliper/Chamfering Tool
1.3 Shears
2 Installation ............................... 16
2.1 Removal of pipe packaging
2.2 Surface mounted installation
2.3 Surface embedded installation
2.4 Minimum radius of bends
2.5 Thermal expansion
2.6 Pressure drops
2.7 Cutting the pipe
2.8 Calibration and chamfering
2.9 Inserting pipes into unions
3 Press fitting ............................. 21
3.1 Press fittings 14 ÷ 32 Profile B (KSP 1)
3.2 Press fittings 40 ÷ 75 Profile TH (KSP 11)
3.3 Press fittings 40 ÷ 75 Profile F (KSP 2)
4 Checking of press fittings ........ 23
4.1 Profile B (KSP 1)
4.2 Profile TH (KSP 11)
4.3 Profile F (KSP 2)
5 Testing of the system ............. 24
6 Warnings ................................. 24
14
GB