Information; Uhf Credential Installation - CDVI U4GO Série Instructions De Montage

EN

INFORMATION

Scroll until
"menu Info"
then press "P3"
m e n u
I n f o

UHF CREDENTIAL INSTALLATION

Choose one of the six places (A-F) on the windshield as showed in the figure below to install.
According to the European Standard, some vehicles with metalized windshield have a reserved area (not
metalized) for RFID tags so choose position B.
Card or cardholder
For optimum performance, install the UHF credential on the same side of the reader.
(left side A or F, Right side C or D and overhead B or E).
NOTE : When there is a metalized windshield, the read range of the reader will be affected.
Please test the performance before using it .
Reader
TAG
Scroll to desire
info then
Displays the current output settings:
press "P3"
If output set in "Relay" mode, it will display relays operating
I n f o settings; pulse, latched or timed
O u t p u t
If output set in "Wiegand" mode, it will display system protocol;
26, 30 or 44 bits
Displays the number of UHF credential that are registered.
I n f o
(7680 max. in stand-alone, "Relay" mode)
N . T a g s
Displays the number of remotes (Tx) that are registered.
I n f o
(100 max. in stand-alone, "Relay" mode)
N . T x
Displays the UHF credential memory position
T a g
(Useful to delete a specific UHF credential from the list)
L i s t
Displays the remote control (Tx) memory position
T x
(Useful to delete a specific remote "Tx" from the list)
L i s t
I n f o
Displays firmware version of the module
V e r s i o n
A
Steering wheel
F
TAG
A6U48 - A10U48
Mid & Long Range UHF Reader
B
Rearview mirror
E
C
D
Reader
TAG
TAG
29