Charge The Battery Pack - Batavus E-go Manuel D'utilisation

4.2 Charge the battery pack

1. Connect the charger (A) to the mains
voltage.
2. Connect the plug (B) of the charger to
the contact point of the battery pack
(C).
3. When you charge, the light (D) is red.
When the battery pack is fully charged
the light turns green. The charge is
stopped automatically after 24 hours.
The light on the charger remains green.
• A full charge takes about 4.5 hours with a 317 Wh battery pack
and 6.5 hours with a 418 Wh battery pack.
• The battery pack can be charged both in and outside the bicycle.
• When placing back, pay attention to the contact points of the
docking station (E).
30
30
E
C
B D A