Charging The Battery Pack; Installing The Battery Pack - Batavus ION Guide D'utilisation

2.2

Charging the battery pack

1. Check that the power cable is
properly connected to the charger
(A).
2. Connect the charger (A) to the
mains voltage. The green indicator
(B) will light up.
3. Connect the plug (C) of the charger
to the contact point (D).
4. Remove the charger before you
start cycling.
2.3

Installing the battery pack

1. Remove the key from the lock.
2. Carefully push the battery pack
(A) under the luggage carrier
alongside the guide until the lock
clicks (B).
3. Make sure that the cover (C) of the
charging plug is closed.
4. Check whether the battery pack
(A) has been positioned correctly.
A correctly positioned battery pack
cannot be removed any more without
the key.
41
A
41
B