Settings Menu - ubbink Ubiflux W180 Consignes D'installation

Display layout

6.3 Settings menu

For optimum performance of the appliance, set values can be
modified in the settings menu to adjust the appliance to the
installation situation; refer to chapter 13 for a list of the set va-
lues. A number of set values, such as the air flowrates, are laid
down in the design data.
Warning:
Because changes may affect the proper performance of the
appliance, changes of settings not described here require
consultation with Ubbink.
Incorrect settings may seriously affect the proper perfor-
mance of the appliance!
Modifying the set value in the settings menu:
1. In operating mode, press the 'MENU'key.
1x
2. Press the 'MENU' key to activate the "settings menu".
Settings menu is active
2x
3 Select the set value to be modified with the '+' or '- ' key.
Set value
Step number
set value
Select set value to be modified
4 Press the 'Menu" key to select the required set value.
Use keys '-' and '+' to modify the selected set value.
6 Store the modified set value
1x
Do not store the modified set value
Do not store modified value
7 To modify other set values, repeat steps 3 - 6. When you
do not want to modify any more set values and return to
operating mode, then press the 'R' key.
Back to operating mode
Ubiflux W180 / W180+
Chapter 6
1x
Store modified set value
1x
17