Connection Examples Multiple Switch; Multiple Switch With Filter Indication; Wireless Remote Control (Without Filter Indication); Additional Multiple Switch With Filter Indica- Tion - ubbink Ubiflux W180 Consignes D'installation

Electric connections accessories
11.2 Connection examples multiple switch
A multiple switch can be connected to the modular connector X180 of the Ubiflux.
This modular connector is directly accessible from the top of the appliance (see §11.1) .
11.2.1 Multiple switch with filter indication
B
230 V
50 Hz
A = Ubiflux W180
B = Multiple switch with filter indication
11.2.2 Wireless remote control (without filter indication)
230 V
50 Hz
11.2.3 Additional multiple switch with filter indication 11.2.4 Additional multiple switch wireless remote control
B1 B2
230 V
50 Hz
C
A = Ubiflux W180
B1 = Multiple switch with filter indication
B2 = Additional multiple switch with filter indication
C = Splitter
A
B
A
A
Ubiflux W180 / W180+
RJ12/6
Wire colours C1 - C6 may vary dependent on
the type of modular cable used.
Note: For the modular cable used, the "tab" of both modular
connectors must be mounted facing the mark on the
modular cable.
A = Ubiflux W180
C D
B = Receiver for wireless remote control
C = Transmitter with 4 settings
E
D = Transmitter with 2 settings
E = Any additional 2- or 4-settings
transmitters (A maximum
B
230 V
50 Hz
A = Ubiflux W180
B = Multiple switch with filter indication
C = Receiver for wireless remote control
D = Transmitter with 2 settings
E = Splitter
Chapter 11
RJ12/6
B
(for instance the kitchen)
(for instance the bathroom)
of 6 transmitters can be signed
on to 1 receiver)
C
E
A
D
29