Message Text For Operating Mode - ubbink Ubiflux W180 Consignes D'installation

Chapter 6
6.2.3 Message text for operating mode
This part of the display may show a message text. The
message text "Filter" always takes precedence over the
other message texts.
The following message texts may appear during operating
mode.
Message text
Description
on display
FILTER When the text "FILTER" appears
on the display, the filter must be
cleaned or replaced; for detailed
information on this subject see
§ 9.1
Slave 1, Slave For coupled appliances the mes-
2 etc. sage text shows which appliance is
"Slave 1" - "Slave 9"; for detailed in-
formation on this subject see §11.3.
The "Master" appliance displays
the regular layout regarding venti-
lation mode.
EWT When the text "EWT" appears
on the display, the geo-heat ex-
(Only for + ver- changer is active.
sion) For detailed information, also refer
to §11.8.
CN1 or CN2 When the text "CN1 or CN2" ap-
pears on the display, one of the ex-
(Only for + ver- ternal switch inputs is active, also
sion) see §11.6.
V1 or V2 When the text "CN1 or CN2" ap-
pears on the display, one of the
(Only for + ver- external 0 - 10 V inputs is active,
sion) also see§11.7.
16 Ubiflux W180 / W180+
Display layout
Master - appliance
Slave - appliance