Putting Into Operation; Switching The Appliance On And Off - ubbink Ubiflux W180 Consignes D'installation

Chapter 7

7.1 Switching the appliance on and off

There are two methods to switch the appliance on or off.
- Switching on and off by inserting or pulling the power plug
- Switching on and off through software on the appliance display
Switching on:
• Switching on the mains power:
Connect the 230 V power plug to the electric system.
All display symbols appear during 2 seconds.
The software version appears during 2 seconds.
Directly after that the Ubiflux will be running in the mode as
set on the multiple switch. If no multiple switch is connected,
the appliance will always run in mode 1.
• Switching on through software:
When the Ubiflux is switched off through software, the dis-
play will show the text "OFF".
The appliance can be switched on by pressing the '-' key
during 5 seconds.
20
2 sec.
2 sec.
> 5 sec.
Ubiflux W180 / W180+

Putting into operation

Switching off:
• Switching off through software:
Press the "-" key for 5 sec. to switch off the appliance through
software. The text 'OFF' appears on the display.
• Switching off the mains power;
Pull the 230 V mains plug from the mains to take the voltage
from the appliance.
Nothing is shown on the display now.
Warning
When working on the appliance, always take
the voltage from the appliance by first switching
it off through software and subsequently pulling
the power plug.
>5 sec.