Display Layout; General Explanation Control Panel - ubbink Ubiflux W180 Consignes D'installation

Chapter 6
6.1 General explanation control panel
The display shows the appliance's current operating mode.
Four control keys can be used to call up and modify settings in
the control unit programme.
When the mains power to the Ubiflux is switched on, all display
symbols will appear during 2 seconds; at the same time the back-
light is switched on for 60 seconds.
When one of the control keys is operated, the display will light
up during 30 seconds.
When no keys are operated or when no deviating situation has
developed (such as a blocking fault) the display will show the
operating mode (see § 6.2).
After operating the key 'Menu', the keys "+" or "-" can be used
to select from three different menus, including:
Key Function key
Menu Activate the settings menu; to the next step in the submenu; confirm value change
- Scroll; modify value; Switching on or off the Ubiflux from operating mode (press for 5 seconds)
+ Scroll; modify value
R One step back in menu; cancel value modification; filter reset (press for 5 seconds), delete fault history
14
• Settings menu (SET); see § 6.3
• Readout menu (READ), see § 6.4
• Service menu (SERV), see § 6.5
Press the R key to leave any menu and return to operating
mode.
Briefly press the R key (shorter than 5 seconds) to switch on
the display backlight without changing anything in the menu.
A
B
Ubiflux W180 / W180+

Display layout

A = display
B = 4 control keys