Publicité
Les langues disponibles
Les langues disponibles
Fitting Instructions
A
Towball Receptor Unit
P
Safety Chain Plate
FITTING OF TOWBALL RECEPTOR
1.
Remove original bolts at (X) and Towbar Centre Part (if fitted).
2.
Attach Towball Receptor Unit (A), Safety Chain Plate (P) and
original Electrical Plate if removed, to Towbar Centre Plates using
replacement Bolts and Nyloc Nuts.
3.
Tighten Bolts to 96 Nm.
DETACHABLE OPERATION
1.
Slide Handle (B) into Towball Receptor Unit (A) and
keep orientated as shown.
2.
Slide Towball Neck (C) into Towball Receptor Unit (A).
3.
Rotate Towball Neck (C) anti-clockwise 180
4.
Rotate Handle (B) clockwise until Spring Loaded Lock
clips into position as shown.
REMOVAL OF TOWBALL
Removal is a reverse of the above procedure. Place Handle
(B) and Towball Neck (C) in bag provided. After removing
Towball Neck (C) fit Weather Cover (W) to Towball Receptor
Unit (A).
WITTER TOWBARS
Deeside Ind. Park, Deeside, CH5 2NY Tel: 01244 284500 Fax: 01244 284577
IT IS ESSENTAL TO HAND THIS TO VEHICLE OWNER
MATERIALS
B
Handle
W
Weather Cover
0
.
Detachable Towball System
C
S
2
Towbar
Electrical Plate
ZR2
Towball Neck
Towball Neck Bag
M12 x 75mm x 1.75 Bolts + Nylocs
Issue 2
Publicité
