Prior To First Use; Setting The Clock; Making Coffee - Krups KM750850 Mode D'emploi

way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
In the interest of improving products, Krups reserves the right to change specifications
without prior notice.
„ „
Take your coffee maker out of the box and remove the packaging and all other
items (Stickers, hang tags, etc.)
„ „
Wash the detachable parts of the machine in warm soapy water.
„ „
Operate your coffee maker for the first time without coffee using 1 liter of water to
rinse the circuit.
1. Press and hold the Hour Clock button (P) for 2 seconds to set the current hour.
2. Then press and hold the Min Clock button (Q) for 2 seconds to set the current
minute.
There is an AM indicator or a PM indicator on the left side. You have to press the Hour
button and make a complete turn of the clock in order for the AM or PM indicator to
appear.
When the clock stops flashing, the time is set.
TIPS & ADVICE
Your clock has now been set and will continue to keep the correct time, even
after the coffee maker has been shut off. Unplugging the coffee maker or a
power failure will reset the clock. Repeat the instructions above to reset the
clock.
1. Place the coffee maker on a hard, flat surface. With the coffeemaker turned off,
plug the machine into a 120V outlet.
2. Fill the carafe with fresh, cold water (preferably bottled or filtered water). Open the
hinged cover and pour the water into the water tank. The number of cups is shown
by the water level indicator. Do not exceed the maximum level - Fig. 1, 2 and 3.
Note:
– The amount of brewed coffee will be less than the water placed in the coffeemaker
since about 10% is absorbed by the coffee grounds and the filter.
3. Place the carafe, with its lid, securely on to the heating plate (H) to activate the
brewing mechanism.

PRIOR TO FIRST USE

SETTING THE CLOCK

MAKING COFFEE

3