Bemer 3000 Mode D'emploi page 65

2. Select the desired intensity by pressing one of the intensity
levels 1 to 10 (8 minutes duration each).
- The selected intensity level will light up. The illuminated dis-
play of the intensive applicator lights up. Running lights for
all intensity levels indicate the proper function of the system.
The time display indicates the remaining therapy time in
2-minute intervals.
Instead of the intensity levels you can also select one of the four
programs (P1 to P4).
P1 = 8 min., P2 = 12 min., P3 = 16 min., P4 = 20 min.
- Within the programs the intensity levels change. You can
recognize the change of intensity by the steadily illuminated
diode of the respective intensity level. The time display shows
progress in time.
At the end of the therapy period
- The running lights turn off
- An acoustic signal sounds
- The control unit switches off automatically after one minute
if there is no input
65
english