Cleaning The Motor Filter - AmazonBasics B071VNCNLF Mode D'emploi

• Remove the container.
• Open the top lid by pulling its lock upwards.
• Pull out the black and blue cylinder.
• Separate the cylinders from each other by rotating either one of them counter-
clockwise.
• If necessary, clean the cylinders and the dust container with a damp cloth or
under running water.
• Remove the filter frame from the lid by simply pulling it out.
• Remove the foam inlay.
• Tap the filter frame to remove dust.
• If necessary, rinse the filter frame and the foam inlay under running water.
• To avoid damaging the filter, do not use any tools.

Cleaning the Motor filter

• We recommend to clean the Motor filter about twice a year or when it appears to
be dirty.
• The filter is installed behind the air outlet grid. Push the grid lock to the left and
pull out the air outlet grid at the same time.
• Slightly press down the lock on the top side of the filter frame and pull out the
filter frame.
• Rinse the filter with warm water.
• Let the filter dry completely. Do not expose it to direct sunlight.
• Put the filter back in place and reinstall the air outlet grid.
• Both filter and grid must click into place.
NOTICE Never use the appliance without filters installed. This can
cause power loss or damage to the appliance.
Motor filter
Air outlet
grid
Grid lock
13