Cleaning The Hepa Filter; Cleaning The Motor Filter - AmazonBasics B071VNC8M4 Mode D'emploi

• Remove the dust container and empty it (
the Dust Container).
• Open the top lid by pulling its lock upwards.
• Take the HEPA filter
• Remove the filter compartment.
• Tap the filter frame to remove dust.
• If necessary, rinse the filter frame and the foam inlay
under running water.
• To avoid damaging the filter, do not use any tools.
• Reinstall the filter in the reverse order.
• We recommend to clean the Motor filter about twice a
year or when it appears to be dirty.
• The filter is installed behind the air outlet grid. Pull the tab
of the outlet grid and remove it.
• Pull down the tab at the top of the filter and remove it.
• Rinse the filter with warm water.
• Let the filter dry completely. Do not expose it to direct
sunlight.
• Put the filter back in place and reinstall the air outlet grid.
• Both filter and grid must click into place.
Notice
71VNC8M4-AmazonBasics-Cylinder Bagless Vacuum cleaner (16H)-V02 (Multi).indb 15

Cleaning the HEPA Filter

out.

Cleaning the Motor Filter

Never use the appliance without filters installed. This can cause
power loss or damage to the appliance.
Cleaning
15
9/8/17 2:48 PM