Cleaning And Maintenance - AmazonBasics B07B9BWKL7 Mode D'emploi

• Place the dust container back on the product.
Brush roller: replacing the brush and belt:
NOTICE
• Unscrew 5 screws located underneath the combo brush (H).
• Remove the brush base plate.
• Remove the brush roller and the belt.
• Loop the new belt around the motor's pulley (1) and then the brush roller's (I)
pulley (2).
• Stretch the belt and place the brush roller back in place.
• Rotate the brush roller (I) to ensure the unobstructed movement of the belt.

Cleaning and Maintenance

WARNING
WARNING
NOTICE
10
Always unplug the product before replacing parts.
I
2
Belt
1
Risk of electric shock! To prevent electric shock, unplug
before cleaning.
Risk of electric shock! Do not immerse the electrical parts of the
product in water or other liquids. Never hold the product under
running water.
Reinstall the fi lters only after they dry completely.
H
I
Brush plate