shark S3255EU Notice D'utilisation page 35

ASSEMBLY
1
Insert the handle into the steam mop base and push
until you hear a click.
2
Lift the latch on the handle to adjust to the desired
height and close. (fig. 1)
3
For your comfort, you can adjust the height of the
mop. Just lift the latch on the tube 90 degrees to the
open position. Holding the handle, extend the tube
to the desired height and then close the latch to the
locked position. (fig. 2)
fig. 1
IMPORTANT: Never use the Steam Lite Steam
Mop without attaching a Dirt Grip
Pad to avoid damage to your floor and mop.
IMPORTANT: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended
to test an isolated area of the surface to be
cleaned before proceeding. We recommend
that you check the use and care instructions
from the floor manufacturer.
fig. 2
Triangle
™
sharkclean.eu 35