Installing The Handle - GreenWorks ELITE EPW-2000 Guide D'utilisation

ASSEMBLY INSTRUCTIONS

INSTALLING THE HANDLE

See Figure 5.
• Push and hold the button on the handle as you slide the handle into the holes in the frame.
NOTE: Before use, pull the handle up until the lock button snaps through the locking slot to
secure the handle in place.
Fig. 5
ASSEMBLING THE SPRAY WAND
See Figure 6.
• Push the end of the spray wand into the trigger handle and rotate clockwise to secure.
• Pull on the spray wand to be certain it is properly secured.
Fig. 6
13