Delete One - Kenwood DPX791BH Mode D'emploi

BLUETOOTH®
PHONE BOOK 1 Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
volume knob.
• To select the desired first letter, press S / T, then press the
knob.
Select "1" to search with numbers and select "
symbols.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob
to call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing.
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as
"Ú" is showns as "U".)
( Make a call using phone book)
1 Turn the volume knob to select a number (0 to 9) or character (
NUMBER DIAL
+).
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the phone number.
2 Press to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( Make a call using voice recognition)
BATT *
LOW/ MID/ FULL: Shows the strength of the battery.
SIGNAL *
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current
received signal.
* Functionality depends on the type of the phone used.
18
*
* " to search with
2
and until you finish entering the phone number.
Make a call using phone book
1 Press to enter phone book directly.
2 Turn the volume knob to select a name, then press the knob.
), turn the
3 Turn the volume knob to select a phone number, then press the
knob to call.
Make a call using voice recognition
1 Press and hold
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Delete a contact
1
Press
* , #,
2
Turn the volume knob to select [CALL HISTORY], then press the knob.
3
Turn the volume knob to select a contact.
4
Press and hold the volume knob to enter delete mode.
5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
DELETE ONE: Selected name or phone number in step
DELETE ALL: All names or phone numbers in [CALL HISTORY] in step
deleted.
6 Turn the volume knob to select [YES], then press the knob.
7 Press and hold
• To return to the previous setting item, press
• Not applicable for mobile phone that supports PBAP.
to activate the connected phone.
to enter Bluetooth mode.
3
to exit.
.
is deleted.
2 is