Backerplate Installation; Logo Placement - Napoleon S25i Manuel D'installation Et D'opération

4.5

backerplate installation

Install brackets (supplied) onto both sides of the appliance by inserting the hooks into the desired
A.
appliance slots.
note:
Brackets are asymmetrical. During installation, ensure the top tabs face forward (Fig. 4-7).
Place the hooks on the backerplate into the slots in the brackets previously installed in step A (Fig. 4-8).
B.
NOTE:
Top
tabs
face
forward
Adjust the blower air channel by sliding it forwards or backwards (Fig. 4-9).
C.
Fasten the blower air channel in place by installing 2 screws (supplied) (Fig. 4-10).
D.
4.6

logo placement

Remove the backing of the logo supplied and place, as illustrated.
Slot
Hook
Fig. 4-7
Blower Air
Channel
Fig. 4-9
1/2"(13mm)
1/2"(13mm)
Hook
Slot
Backerplate
finishing
EN
Fig. 4-8
Fig. 4-10
17
W415-2838 / A / 08.20.20