and a turbo button. Always begin
mixing or kneading at speed
- To knead thick dough, we
recommend using speed
- You can also increase the speed
by pressing the turbo button
We however recommend that you
use it only briefly (a maximum of
30 seconds for thick dough).
• After finishing, set the speed control
to
• Disconnect and press the unlock
button
to raise the hinged arm.
Then press the mixer unlock button
to remove the mixer from its
stand.
• Then press the ejection button
to remove the beaters or kneaders.
• Check that the appliance is
unplugged, that the speed control
is set to
beaters or kneaders have been
removed from the appliance.
• Lift the panel at the back of the
appliance and screw the blender
shaft
without forcing it until you hear a
click
• Connect the appliance:
- Dip the blender shaft into the
preparation before starting to
avoid splashing.
- Start using the speed control
, initially at speed
. Use the Turbo button
only.
and that the
anti-clockwise
then
the recipe requires more power.
- Stop the appliance before
removing the blender shaft from
the preparation (to avoid
splashing).
• Stop the appliance by selecting
, disconnect it and unscrew the
blender shaft
clockwise.
• In a saucepan on the hob.
• Do not use it empty or with ice
cubes, to chop raw meat, dried fruit
(almonds, hazelnuts, etc.).
- Place the bowl
stabiliser base
- Place the blade
of the bowl
- Place the food in the bowl
and then place the reducer
• Check that the appliance is
unplugged, that the speed control
is set to
beaters or kneaders are no longer
on the appliance.
,
- Lift the panel at the back of the
appliance and place the
if
appliance on the reducer
14
by turning
on the
.
on the shaft
.
and that the
.
of