Suevia 130.8721 Mode D'emploi page 11

Water level can be adjusted means of height adjustment of the floater.
For this purpose lift up the locking screw (1). Open the cover (2).
Loose the hexagon nut
adjust the floater at desired height (3)
and tighten the nut on again.
Close the cover.
Click into place the locking screw.
Take care of the following:
Float valve has to be placed that way that it is situated in a 90° angle to the valve lever
(24 V, 7 W, Ref. 131.527) is recommended for increased frost protection.
(3),
131.0527
131.0580
Bite protection shield,
connection of water line
from the side
for SUEVIA frost protection heating cables and
connections of SUEVIA flat tip-over troughs
131.0579
Bite protection shield,
connection of water line
from beneath
.
Height adjustment