Arrangement - Christie LW502 Mode D'emploi

Arrangement

Refer to tables T-1 to T-3 at the back of this manual as well as the following to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
Secure a clearance of 50cm or greater between the exhaust vents and walls, and
a clearance of 30cm or greater between the intake vents and walls. Assume that
there is enough clearance in the front, back, and top of the projector in the fi gure
below.
50cm or greater
Secure a clearance of 30cm or greater between the intake vents and walls.
Assume that there is enough clearance in the front, sides, and top of the projector
in the fi gure below.
(continued on next page)
LW502/LWU502/LX602 Setup Guide
020-001101-03 Rev. 1 (02-2018)
Elevator feet
Exhaust
vents
30cm or greater
Intake
vents
Ⓗ × Ⓥ : Screen size
ⓐ : Projection distance
Projector top
Projector bottom
30cm or greater
Intake
vents
6