Applications - Bowers & Wilkins ISW-3 Mode D'emploi

1 Contents
Check that you have the following components
shown in Figure 1:
a. Subwoofer
b. Louvre fascia (white)
c. Louvre (black)
d. Cowl extension
e. Cut-out template
f. Gasket strips
g. Angle support brackets
h. No.8 x 12mm (0.5in) screws
i. M3 x 35mm (1.38in) button head screws
j. Support bar
k. Rubber feet & locknuts
l. No.4 x 10mm (0.38in) csk screws
m. No.6 x 25mm (1in) csk screws
In addition, you should also have a Quick Start
Guide and warranty leaflet. This manual provides
more detail than the Quick Start Guide.
Consult your dealer if any parts are missing or
appear damaged.

2 Applications

There are four possible applications, each covered
by a separate section:
In-ceiling - new construction only (Figure 2)
Go to Section 3.
In-wall - new construction only (Figure 3)
Go to Section 4.
Under the floor (Figure 4)
Go to Section 5.
In a kitchen unit (Figure 5)
Go to Section 6.
a
1x
f
e
1x
j
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
c
b 1x 1x
g
2x 4x
k
1x 3x
d
1x
i 2x
h 8x
m 3x
l 10x
3