tecnotest STARGAS Manuel D'utilisation page 29

STARGAS ________________________________________________________________________ BEFORE THE TEST
•
Select the CONTROLS icon to display the following page.
114
113
112
111
110
Pump [on/off]: To enable or disable the pump.
104.
Leak test: To start the leak test.
105.
HC residues: To start the HC-residues test.
106.
Autozero: To start an automatic zero of gas values.
107.
Messages log: To display all error messages of the day. At the end of
108.
each work day.
Bench characterization: Function for the Technical Service staff only.
109.
NO installation: To display a page where to enable the NOx sensor
110.
X
installation.
mV O : To display the oxygen sensor status.
111.
2
Serial number: To display the STARGAS serial number.
112.
Last calibration: To display the date of the last calibration and the
113.
time and date of the last leak test and HC residues test.
Calibration: Function for the Technical Service staff only.
114.
•
Press ESC to quit the CONTROLS page.
•
Press MENU or ESC to disable the FUNCTIONS BAR display.
OPERATING INSTRUCTIONS
104 105 106 107 108 109
25