For A Correct Use Of The Stargas - tecnotest STARGAS Manuel D'utilisation

FOR A CORRECT USE ____________________________________________________________________ STARGAS

FOR A CORRECT USE OF THE STARGAS

In order to use the STARGAS gas analyser safely it is necessary to comply
with the following rules:
•
The analyser must be used in dry places. Its exposure or use near
sources of heat or polluting emissions (stoves, ovens, etc...) must also be
avoided.
•
In order to connect the analyser to the feeding mains make sure that the
mains voltage/frequency corresponds to the ones which are suggested
for the analyser.
•
Do not expose the analyser to shocks.
•
Do not wet the analyser with water or other liquids.
•
Avoid to touch it with wet hands.
•
Replace the burnt fuses with fuses having the same features.
•
Do not lean objects on the supply cable and never bend it sharply.
ATTENTION:
When using the STARGAS inside the cabin to carry out
measurements, air ventilation must be provided to avoid
dangerous gas saturation.
10 OPERATING INSTRUCTIONS