tecnotest STARGAS Manuel D'utilisation page 17

STARGAS ___________________________________________________________________________ DESCRIPTION
COM port: Port for the vehicle ground connection; battery
41.
negative.
Oscilloscope connector BNC: It allows the inlet of the measured
42.
signal through the relevant wire connection.
VGA port : Port for the connection to a standard monitor or to a
43.
TV color (PAL/NTSC systems).
RS232/PC port: Port for the connection to a Personal Computer.
44.
SMOKEMETER port: Port for the connection to a partial flow smoke
45.
analysis cell combined with external supplier.
Connector of connecting cable to the oxygen sensor.
46.
Oxygen Sensor: It measures the oxygen percentage which is
47.
contained in the exhaust gases.
Outlet connection of the analysed gases.
48.
Tightness Test Plugs: They verify the internal and external pneumatic
49.
circuit tightness.
Condensate outlet connection of the analysed gases.
50.
Inlet connection of the exhaust gases.
51.
It is used for the connection of the sample gas bottle.
52.
Actived Carbon Filter: It separates the air that is sucked up for the
53.
internal pneumatic circuit cleaning from unburnt hydrocarbons and
impurities.
Battery Socket: Tool power socket by the connection of the relevant
54.
battery cable (12 Volt).
Fuse compartment with a 5 A quick fuse.
55.
Mains Socket: Tool power supply socket by the connection of the
56.
relevant cable to the power mains.
OPERATING INSTRUCTIONS 13