LG LRG3061 Série Manuel Du Propriétaire page 50

50 WARRANTY
Problem
• Oven or racks are
stained after using
aluminum foil
• Flame or power is
weak
• Surface is not level
• Oven is tipping
• Oven shows error
code (F9, F19) but
cooktop burners are
working.
• Flames too big on
converted cooktop
(NP  LP)
Cause
Aluminum foil has melted in the oven
Gas pressure may be weak
1. Range not leveled
2. Anti-tip device not installed correctly
Level both sides of range
Approximately
0.65"
(16.5 mm)
2
1
The gas pressure regulator valve is closed.
Lever's closed position
The installer missed part of the conversion.
(Check 3 parts: regulator, cooktop nozzles,
broil/bake nozzles.)
regulator cooktop nozzles
Anti-tip bracket Wall plate
Screw must
enter wood or
concrete
Use carpenter's level to
check level.
broil/bake nozzles
Prevention
• Never cover the oven bottom
or cover an entire rack with
materials such as aluminum
foil.
• If the foil has already melted
onto the oven, it will not
affect the performance of the
oven.
• Check with gas supplier first
• Check with installer first
• Check that the regulator
valve is in the open position.
• If the regulator valve is
closed, rotate the lever to
open the valve.
Lever's closed Lever's open
position position
• Check with installer first
• Refer to installation manual