Special Functions - Grundig DTR 6000 2.1 BT DAB+ WEB Manuel

SPECIAL­FUNCTIONS
Set­the­display­illumination­–­for­
the­stand-by­mode
You can choose whether the display is always
displayed on level in the stand-by mode or whet-
her it displayed dim level after a desired time (10,
20, 30, 45, 60, 90, 120 or 180 second).
1 Press and hold »Menu/INFO« on the device
to open the menu, select System Settings → Ba-
cklight.
2
Select the option »System
/
with » « and confirm by pressing »OK«.
3 Select the option »Backli g ht« with »
and confirm by pressing »OK«.
4 Select the desired option "On" or 10, 20, 30,
45, 60, 90, 120 or 180 second) with »
and confirm by pressing »OK«.
5
Press »Menu/INFO« to end the setting.
Note:
The display is illuminated after pressing any
7
button.
Call­up­the­software­version
1
Press and hold »Menu/INFO« on the device
or »Menu« on remote control to open the
menu.
2 Select the option »System
with » / « and confirm by pressing »OK«.
3 Select the option »Info« with »
confirm by pressing »OK«.
– Display: Actual software version. For more
information press »
4
Press and hold »Menu/INFO« on the device
or »Menu« on remote control to end the dis-
play.
44­ ­ ENGLISH
settings«
/
/
settings«
/ « and
/ «.
­--------------------------------------------------------------------------------------------
Deleting­all­settings­(Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1 Open the menu with press and hold
»Menu/INFO«.
2
Select the option »System
/
with » « and confirm by pressing »OK«.
3
Select the option »Factor y reset« with
/
» « and confirm by pressing »OK«.
– A safety confirmation is displayed.
«
4 Select the option »Yes« with »
Note:
To cancel the function select the option »No«
7
«
by pressing »
5
Press »OK« to confirm setting.
– Display: »Restartin g «.
Software­Update
From time to time, software upgrades may be cre-
ated with bug fixes and/or additional features.
You can either check manually or set DTR 6000,
TR 3350 to check periodically automatically (this
is the default). If newer available software is dete-
cted, you will be asked if you want to go ahead
with an update. If you agree, the new software is
then downloaded and installed. After a software
upgrade, all user settings are maintained.
Note:­
Before starting a software upgrade, ensure that
7
DTR 6000, TR 3350 is plugged into a stable
main power connection. Disconnecting power
during an upgrade may permanently damage
the unit.
settings«
«.
r e
«.
r e