Function Description Of The Monitor - Waeco mobitronic RV-RMM-56 Mode D'emploi

RV-RMM-56_q4.qxd 03/09/03
The connection box provides inputs for 2 video sources. (see H 3). This
can be a DVD player (WAECO Art.-No. DVD-PL-10), a camera etc. Plug
the RCA cable of the video sources into the sockets VIDEO/AUDIO.
The connection box provides a mono-audio signal.
Key POWER (see E 1) The device is switched on.
Depending upon whether a video source (e. g. WAECO DVD player,
DVD-PL-10) is connected and in operation, a picture appears on the
appropriate channel. Adjust the picture according to your needs.
The following functions are available:
Keys ADJ (see E 5)
Setting of the volume during normal operation
Key MENU (see E 3)
Menu Function (see G 1)
Input -> Selection of the video sources AV 1 or AV 2
Blue back -> If no video signal is adjoining, the background appears
Revolve -> vertical rotation of the picture by 180°
System -> Selection of the video format PAL/ NTSC
Menu Picture (see G 2)
Contrast -> Setting the contrast strength
Bright -> Setting the brightness
Color -> Color strength
Tint -> Color ratio red/ blue (only with NTSC video format)
Keys SEL
For the selection of the menu points
Keys ADJ
For the setting within the menu point
11:01 Page 21

Function description of the monitor

blue, On/Off
(see E 4)
(see E 5)
21 21