Amann Girrbach Ceramill sintron Instructions D'utilisation page 28

A P P L I C A T I O N
Procedure when fabricating dental framework
The determined enlargement factor for the blanks is provided on the
E N
blanks.
▷ Enter the enlargement factor in the CAM software.
Insufficient milling results!
▷ Machine the Ceramill Sintron blanks exclusively with the Ceramill
Motion 2 using the dry-milling procedure without the use of cool-
ant/lubricant (C/L).
▷ Mill the blanks applying the milling strategies provided for the mate-
rial.
28
NOTE:
Further details on designing and manufacturing framework
with the Ceramill Mind CAD software are available on the
Ceramill M-Center homepage in the protected download area.