Operation; Lamp Replacement - Klarstein 10035466 Mode D'emploi

OPERATION

Depress this button to turn on/off the motor.
Press this button for increasing the speed of the fan.
Press this button for decreasing the speed of the fan.
Turn on/off light.
Fan speed display:
1 = low speed
2 = medium speed
3 = high speed
Boost function: Press +. The buzzer sounds, the indicator light lights up and the boost
function starts, the display shows „b". If no other speed is selected within 5 minutes or
the range hood is switched off, the appliance automatically runs at high fan speed.
Quick timer: Press + and - hold for 1 second, Digital display will flashing & into
5 minutes count down, after 5 minutes motor & light will turn off automatic & Buzzer
sound for 1 second.

LAMP REPLACEMENT

Disconnect the light wiring located inside
the hood (behind the grease filter). Then
use a screwdriver to remove the lamp
sockets and wiring. Replace the lamps
with the same type.
Max.
Voltage
power
1.5 W DC 12V
Ø 68 mm
ILCOS D
code
DSR-1.5-S-68
EN
25