Recalling The Last Recorded Measurement; Changing Batteries - boso Medicus uno Mode D'emploi

Recalling the last recorded measurement

To recall the result of the last measurement, press the
START-button for approx. 3 seconds, while the unit is
switched off.
The result of the last measurement appears for approx.
3 seconds. Afterwards the unit switches off automati-
cally (see illustration 8).
M
Illustration 8
52
Systole
mmHg
Diastole
mmHg
Pulses/min.
Enter each individual value
in your record card.
To start a new measure-
ment, simply
„START".
The monitor switches off auto-
matically 5 seconds after the
last measurement is displayed.

Changing batteries

when the monitor is switch-
ed on can result in loss of
data (see page 43. Change
batteries only when the moni-
tor is switched off).
press