Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
DESCRIPTION:

1. CONTROL PANEL

A. DMX LED: is lit when the unit receives a DMX signal.
B. Master LED: is lit when the unit is switched as master
C. DISPLAY: shows the various menus and the selected functions.
D. Slave LED: is lit when the unit is in slave mode
E. Sound LED: blinks to the rhythm of the music while the unit is in audio mode
F. MENU button: used to select the different menu items
G. DOWN button: to go back in the menu and to lower the values shown on the display.
H. UP button: to go up in the menu and to increase the values shown on the display.
I.
ENTER button: used to confirm your choice.
2. Internal microphone: used to control the different sound modes
3. DMX input: can be connected to a DMX light controller or to the previous projector in the DMX chain
4. DMX output: can be used to connect the DMX signal for the next projector
5. Mains input with IEC socket and integrated fuse holder, connect the supplied mains cable here.
6. Mains output with IEC socket: you can use a special IEC power cable to connect this output with the
mains input of the next SUPER LED RAINBOW for easier linking. (max 10 units can be linked)
7. Safety eyebolt: used to attach a safety cable when the unit is rigged (see paragraph "overhead rigging).
8. Rigging bracket
9. Jack input for remote control: used to connect the CA-8 controller
10. Din input for remote control: used to connect the wireless RF-8 controller (obsolete: use RF-DMX
converter instead)
11. Cooling fan: never cover the ventilation opening and the heat sink openings and keep them free of dust
as this may result in overheating
MAIN MENU:
 To select any of the functions, press the MENU button up to when the required one is shown on the
display or use the DOWN and UP buttons to browse the menu.
 Select the function with the ENTER button (the display blinks).
 Use DOWN and UP buttons to change the mode.
 Once the required mode is selected, press the ENTER button to confirm.
To go back to the main menu without any change press the MENU button shortly. The main menu is shown
in the chart.
JB SYSTEMS
®
3/61
OPERATION MANUAL
SUPER LED RAINBOW

Publicité

Table des Matières
loading

Table des Matières