Installing The Adapter - VOLTCRAFT VC810 Mode D'emploi

9. INSTALLING THE ADAPTER

Do not forget to insert batteries before installing the
adapter.
Keep the infrared interface contacts on the adapter (6)
and multimeter clean and free of dust. Clean the
contacts with a lint- and dust-free cloth before attaching
the adapter.
1. See Fig. 2.
2. Turn over the multimeter and place it on a soft, protective
surface.
3. Slide the adapter all the way into the adapter attachment on
the multimeter.
4. Use a Phillips screwdriver to slightly tighten the Phillips screw (7).
• Repeat these steps in reverse order to detach the adapter.
Fig. 2
30