Rs485 Address [Not Vip]; Language - Comelit 3072/B Mode D'emploi

Scroll through the list using
.
CALL MANAGEMENT
keys or
SIMPLEBUS TOP h i
Press the key
to confi rm.
PLEASE WAIT
PARAMETER
CHANGED
or:
ERROR
DEFAULT SETTINGS
Exit confi guration (see
page 17).
1.1.4. RS485 ADDRESS [NOT VIP]
The value of this parameter is used only in special applications.
PROCEDURE DISPLAY INFO
Access confi guration
MAIN
(see page 17).
SETTINGS
Select the menu
SETTINGS / SYSTEM SETTINGS
PARAM. / ADDRESS
SYSTEM PARAM.
RS485
SYSTEM PARAM.
ADDRESS RS485
ADDRESS RS485
0000
Enter the desired value
ADDRESS RS485
using the or keys.
0250
20
EXAMPLE: setting the
system as SIMPLEBUS
TOP
If the change was
successful the speaker will
emit a confi rmation tone.
If the change took place
properly the system type
is shown.
If the directory and
speaker are confi gured
differently and the
directory already
contains data,
the default values must
be restored.
DESCRIPTION
Scroll through the
menu using or .
Press to confi rm.
Press to return to the
menu level above.
The current value of the
parameter appears on
screen.
h i
RANGE: from 0 to 255.
EXAMPLE: Entering
h i
address 250.
Press the key
PARAMETER
to confi rm.
CHANGED
Exit confi guration (see
page 17).

1.2. LANGUAGE

The value of this parameter is used to set the language in which messages
are displayed.
PROCEDURE DISPLAY INFO
Access confi guration (see
MAIN
page 17).
SETTINGS
Select the menu
SETTINGS /
SETTINGS
LANGUAGE
LANGUAGE
ENT.LANG.
ENGLISH
Scroll through the list
using ENT.LANG.
ITALIANO
DEFAULT (italiano)
Press
PARAMETRO
to confi rm.
MODIFICATO
Exit confi guration (see
page 17).
DESCRIPTION
Scroll through the
menu using or .
Press to confi rm.
Press to return to the
menu level above.
The current value of the
parameter appears on
screen.
h i
N.B. If the LANGUAGE
parameter is set to
h i
DEFAULT, you will
be asked to set the
language again at the
next startup.