Reading (Upload) Of The Stored List - Comelit 3072/B Mode D'emploi

INITIAL CONDITION
Module powered up in
SELECT NAME
standby mode.
PROCEDURE DISPLAY INFO
Connect the cable
supplied with software
SELECT NAME
Art. 1249B (R.I. 003) to
terminals TX / RX / - (or
D / D- if you have an
RS485 line).
Run software
Art. 1249B (R.I. 003).
Consult the online
product Guide for the
required settings.
Make the list with the
Username and
SELECT NAME
Code fi elds in
software Art. 1249/B
with R.I. 003, or load an
existing list.
Press the
Download button in
software Art. 1249B
(R.I. 003).
DOWNLOAD
ENDED
DOWNLOAD
FAILED
22
BY h i
DESCRIPTION
BY h i
On software 1249/B
with R.I. 003, the CALL
MODE must be set as
Standard.
BY h i
If the download was
completed successfully.
or:
If an error occurred
during the download.

READING (UPLOAD) OF THE STORED LIST

Software Art.1249/B (R.I. 003 - SW rev. 2.3 or higher) can be used to read the
list, from module 3072/B, with the Username and Code fi elds. The following
preliminary procedures must be performed:
INITIAL CONDITION
Module powered up in
SELECT NAME
standby mode.
PROCEDURE DISPLAY INFO
Connect the cable
supplied with software
Art. 1249/B (R.I. 003) to SELECT NAME
terminals TX / RX / - (or
D / D- if you have an
RS485 line).
Run software
Art. 1249/B with R.I.
SELECT NAME
003. Consult the online
product Guide for the
required settings.
Press the Upload button
in software Art. 1249/B.
UPLOAD
ENDED
UPLOAD
FAILED
BY h i
DESCRIPTION
BY h i
BY h i
If the upload was
completed successfully.
or:
If an error occurred
during the upload.