Ending A Call/Conversation; Accessing/Exiting The Configuration Stage; Settings; System Parameters - Comelit 3072/B Mode D'emploi

Make the call
Press the key
PLEASE WAIT
to call.
If the call is successful
you will see:
CALL
EFFECTED
If the call was not
successful you will see:
CALL
FAILED
Or if the riser
is busy you will see:
USER
BUSY
If the call is successful
and the user answers you
will see:
COMMUNICATING...

ENDING A CALL/CONVERSATION

INITIAL CONDITION
CALL
EFFECTED
or:
COMMUNICATING...
PROCEDURE DISPLAY INFO
Press the key
COMMUNICATION
CALL EFFECTED
Conversation in progress.
DESCRIPTION
END OF

ACCESSING/EXITING THE CONFIGURATION STAGE

PROCEDURE DISPLAY INFO
Connect terminal
PR to terminal –
and power up the
MAIN
module.

SETTINGS

Confi gure the parameters you wish to change... (see pages 17 - 21)
After confi guration is
complete, cut off the
power supply and remove
the connection between
PR and –.
1. SETTINGS

1.1. SYSTEM PARAMETERS

1.1.1. SPEAKER PARAMETERS

This procedure can be used to:
A. Change the audio time
audio times (t AUDIO)
A. Change the door lock time
the door lock relay closure time (t DOOR LOCK)
C. Change the reset time [NOT VIP]
the speaker module reset time once door-entry phone communication
has ended (t RESET)
DESCRIPTION
The module is in
programming mode.
Scroll through the
menu using or .
Press to confi rm.
Press to return to the
menu level above.
The module has exited
programming mode.
17