Ribimex Ribiland PRBVB196TH Manuel D'instructions Et D'utilisation page 25

the ejector chute while the machine is running.
Protect your hands
Rotating cutting knife. Keep hands and all body parts away from the openings while the
machine is running.
Do not place any tools or objects or part of your body in the hopper while the machine is
running.
Let moving parts come to a complete standstill before carrying any intervention on
machine.
Never leave machine unattended while in operation.
Do not leave a running machine unattended.
Do not leave the machine until it is completely stopped.
Protect the environment
Take used fuel mixture to an authorized collection point or follow your local legislation.
Do not discharge into drains, soil or water.
Do not discharge leftovers and/or remainders into drains.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre. Please contact your local authority
or local recycle centre for further information for its safe disposal.
Warning ! Burn hazard. Hot surface
Never touch engine body or muffler with bare hands when engine is running or
immediately after shutting it down.
Only use the product outdoors or in a well-ventilated area. Never start or run the engine
in an enclosed area. The exhaust gases are dangerous because they contain carbon
monoxide.
Do NOT use the machine if the discharge chute cover is NOT fully mounted.
Do NOT stand in front of the discharge chute.
Do NOT allow any person to stand near or approach the discharge chute.
Place the shredder on a solid flat ground.
Do NOT install on slopes or uneven ground.
Do not stand right in front of the feeding hopper.
Position yourself slightly on the side.
Rotation direction of the engine.
If the warning labels come off, become dirty or difficult to read, order new labels from your local
retailer to replace them.
Do not modify your machine.
The warranty will be void if the machine has been modified or used in a way that does not comply
with the instructions set in this manual.
3.2- General safety instructions
Page 25 / 45