Using The Moulds; Melting Chocolate - TEFAL Cake Factory KD8018 Mode D'emploi

Using the Moulds

To ensure the proper operation of your appliance, when filling the moulds, do not exceed the
proportions indicated.
Silicone PROflex Mould
The Cake Factory is only compatible with moulds belonging to the Tefal PROflex range,
dimensions 30 x 21 cm.
Pour into the mould
aluminium bowl
* To cook canelés or for any use of a mould taller than 4.5 cm, directly place the PROflex mould in the Cake
Factory without the support grid.
Non-stick aluminium bowl
Grease the bowl Fill the bowl

Melting chocolate

Place the chocolate Remove the grid
in the aluminium
mould
To melt chocolate, use the Cake Factory non-stick aluminium mould or a ceramic, silicone or
stainless steel mould of maximum dimensions: 19 cm long, 19 cm wide, 6 cm high, which is
suitable for baking at temperatures up to 250°C.
Remove the Ensure that the
black reflector is
properly in place
and attached to
the bottom of the
appliance
Remove the grid
Close
Place the grid on Place the mould
the reflector*
Ensure that the Insert the bowl
black reflector is
properly in place
and attached to
the bottom of the
appliance
Put chocolate in a Place the grid on
suitable container the reflector
Close
Close
Close
29