Cabinet Installation - Frigidaire Gallery Série Instructions D'utilisation

ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS

7. Cabinet Installation

IMPORTANT
Do not lift the oven by the door handle.
Heavy Weight Hazard
• Use 2 or more people to move and install wall oven.
• Failure to follow this instruction can result in injury
or damage to the unit.
Install the Anti-Tip Mounting Screws:
The wall oven can tip when the door is
open. The anti-tip mounting screws supplied with the
wall oven must be installed to prevent tipping of the
wall oven and injury to persons.
1
Unpack the wall oven. Remove the bottom trim
taped on the oven side panel.
2
The mounting holes in the side trims may be used
as a template to locate the appliance mounting
screw holes (see figure 15).
3
Use the two screws supplied to fix the appliance to
the cabinet.
(and Optional Electric or Gas Cooktop Combination)
Anti-Tip Mounting Holes
Figure 15
4
Insert the oven into the cabinet opening. Slide
oven inward leaving 1½" (3,8 cm) clearance
between the oven and front of cabinet (see Figure
16). Pull the armored cable through the hole for it
in the cabinet and toward the junction box while
moving the appliance inward.
7
1½" (3,8 cm)
clearance
between unit
Figure 16