Intended Use - Erbauer ERN642ATL-I Mode D'emploi

WARNING! The vibration emission value during actual use of the power
tool can differ from the declared value depending on the ways in which the
tool is used dependant on the following examples and other variations on
how the tool is used:
How the tool is used and the materials being worked with.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is in good
condition.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not
adequately managed
WARNING! identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Note The use of other tools will reduce the users' total working period on
this tool. Helping to minimise your vibration exposure risk.
ALWAYS use qualified saw blades. Maintain this tool in accordance with these
instructions and keep well lubricated (where appropriate).
Plan your work schedule to spread any high vibration tool use across a number of
days.
Health Surveillance
All employees should be part of an employer's health surveillance scheme to help
identity any vibration related diseases at an early stage, prevent disease progression
and help employees stay in work.

INTENDED USE

This air body saw ERN642ATL is compact and ergonomic with rubber protective grip.
It features adjustable work guide to set cut depths. The specially designed blade seat
makes the saw blade installation and replacement fast and easy. The intended use
includes cutting mild steel 1.2 mm maximum at auto body shops, garages and other
workshops. It also cuts well reinforced fiberglass, aluminium, wood, etc with a
maximum of 1.5 mm.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial trade
use. It must not be used for any purposes other than described.
AIR BODY SAW