Cleaning The Iron (Once A Month) - T-Fal FV28 Série Mode D'emploi

Cleaning the Iron (Once a Month)

• Allow your iron to heat up with a full water tank while
on its heel rest and with the thermostat control set
Max.
to Max.
• Once the indicator light turns off, unplug the iron and
place it over a sink.
• After opening the reservoir cover, remove the anti-
scale rod.
• Shake the iron gently in a horizontal position over
the sink until some of the water (containing the
impurities) leaks from the soleplate. You may push
the turbo steam button to help flush out the minerals.
Click
• To complete the process, re-insert the anti-scale rod
by pushing on it until you hear a click.
2
min.
• Plug in your iron for 2 minutes on the heel rest to dry
the soleplate.
15