Storing Your Iron; For Your Security - T-Fal FV51 Serie Notice D'emploi

4- STORING YOUR IRON

- Unplug the iron and wait for the soleplate to cool down.
- Empty the water tank and set the steam control to DRY. A little water may remain in the tank.
- Wind the cord around the heel at the back of the iron.
- Store the iron on its heel.

FOR YOUR SECURITY

• Warning! Your electrical outlet must correspond to that of the iron (120V a.c).
Connecting to the wrong voltage may cause irreparable damage to the iron and will invalidate the
guarantee.
• If an extension cord is absolutely necessary, a 13 ampere cord should be used. Cords rated for less
amperage may overheat.
• If the electrical cord becomes damaged, it must be immediately replaced. Please contact T-Fal's
Consumer Service Department to avoid any danger.
• Never immerse your iron in water!
• The appliance must be unplugged before filling or emptying the water reservoir.
• If the appliance falls, have it checked by a professional before using it again; unseen damages may
be dangerous.
• The sole plate may be very hot:
- Never touch it.
- Always let it cool off before putting it away.
- Never leave your iron unattended when it is plugged in or while the sole plate is still hot.
- Always keep your iron out of the reach of children.
• NEVER DISASSEMBLE YOUR IRON ON YOUR OWN ;
PLEASE REFER ALL SERVICE AND TECHNICAL QUESTIONS TO T -FAL'S
CONSUMER SERVICE DEPARTMENT.