What Water To Use - T-Fal FV28 Série Mode D'emploi

What water to use?

Your appliance was designed to operate using untreated tap water. However, it is necessary to periodically clean the
steam chamber to remove any mineral deposits.
If your water is very hard (above 30°f or 17°dH or 21°e)mix 50% untreated tap water with 50% distilled water(available
in hardware stores).
Types of water not to use?
Do not use water with additive, pure demineralised or pure distilled water, water from clothes dryers, scented or softened
water, rain water, filtered, bottled or boiled water, water from refrigerators, batteries, air conditioners or rain water as
these may damage the iron. These types of water contain organic waste, mineral elements that become concentrated
when heated and cause spitting, brown staining, leaking or premature wear on your iron
Environment
Environment protection first !
 Leave it at a local civic waste collection point.
i Your appliance contains valuable materials which can be recovered or recycled.
6