Playback; Playing Discs Or Files; Forward And Reverse Scanning - Pioneer BDP-150 Mode D'emploi

Chapter 4

Playback

Playing discs or files

This section describes the player's main operations.
For the types of discs and files that can be played, see
page 7. Video, image and audio files recorded on discs
are played with the Home Media Gallery (page 28).
Press  STANDBY/ON to turn on the power.
1
Turn the TV's power on and switch its input beforehand.
Press  OPEN/CLOSE to open the disc tray and
2
load the disc.
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player's front panel display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
Press  to play the disc.
3
• To pause, press  during playback.
• To stop, press  during playback.
Note
• Some discs start playing automatically when the disc
tray is closed.
• DVD-Video discs have parental lock features. Input
the password registered in the player's settings to
unlock the parental lock. For details, see page 39.
 If the disc menu is displayed
For some discs, the disc menu is displayed automatically
when playback starts. The contents of the disc menu and
the way to operate depend on the disc.
 Resuming playback from where it
was stopped (resume playback
function)
• When  is pressed during playback, the point at
which the disc stopped is stored in the memory.
When  is pressed after that, playback resumes
from that point.
• To cancel the resume playback function, press 
while playback is stopped.
Note
• The resume playback function is canceled
automatically in the following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs
this does not cancel the resume playback
function.)
• When you want to continue playback from a position
you specify to be played next time, see Continuing
playback from a specified position (Continued Viewing
Playback) on page 27.
• The resume playback function cannot be used for
some discs.
Forward and reverse
scanning
 During playback, press  or .
• The scanning speed switches each time the button is
pressed. The speed steps depend on the disc or file
(the speed is displayed on the TV screen).
 To resume normal playback
 Press .
04
21
En