Bosch GDE18V-1 Manuel D'utilisation Et Consignes De Sécurité page 5

160992A2L3 GDE18V-16.qxp_GDE18V-16 5/8/17 10:29 AM Page 5
assembly, adjustments or changing
accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
- Align the guide groove 10 on both sides of
the rotary hammer with the housing guide
8 on both sides of the dust extraction
Never use the dust extraction attachment
without a filter. If the dust extraction
attachment is used without a filter, larger
particles of drilling dust can be flung towards
the user and the power tool can be
damaged.
Only use an undamaged filter (no cracks,
small holes, etc.). Replace a damaged
filter immediately.
Assembly
Disconnect the battery
pack before making any
7
Operating instructions
attachment and slide the dust extraction
attachment towards the rotary hammer.
The dust extraction attachment must
engage with the locking tab (Fig. 2).
- To disconnect the attachment, press and
hold the unlocking button 7, and pull the
dust extraction attachment off the rotary
hammer (Fig. 2).
8 10
Never carry the power tool by the dust
extraction attachment.
Note: The guide 3 is spring-loaded. The
guide can spring forward when the button 4
for drill bit length adjustment is pressed (Fig.
1).
FIG. 2
5